Axis 70 Bedienungsanleitung PDF herunterladen (Seite 48)

Configuring the Document Server User’s Manual

4. Enter the IP address for the Default Router. All traffic directed outside

the local network (according to the subnet mask) is sent to the default

router. Any re-routing via other routers is done automatically. The

setting 0.0.0.0 indicates that no default router is set.

5. Specify the Subnet Mask used for determining when the traffic

should be sent via a router. This number combined with the IP address

identifies on which network the Document Server is located. For

example, the normal class C mask is 255.255.255.0. The setting

0.0.0.0 indicates that automatic router sensing is used.

6. Specify the Domain Name used by the Document Server for

identification on the DNS server.

7. Specify the IP address of the Primary DNS Server. DNS (Domain

Name System) servers are used for identifying computers with names

instead of IP Addresses.

8. Specify the IP address of the Secondary DNS Server that will be used

in case the primary DNS server is disconnected or unavailable.

9. Check this box to enable WINS (Windows Internet Name Service)

over TCP/IP. WINS allows Windows-based clients to locate NetBIOS

resources on TCP/IP networks. WINS is disabled by default.

10. Specify the IP address of the Primary WINS server.

11. Optionally specify the IP address of a Secondary WINS server. The

secondary WINS server will be used in case the primary WINS server

is disconnected or unavailable.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 174 175

Keine Kommentare

Axis 70 Bedienungsanleitung Seite 48