Axis 70 Bedienungsanleitung PDF herunterladen (Seite 33)

User’s Manual Basic Installation

Using BOOTP

in UNIX

Follow these steps to download the IP address using the BOOTP

method:

1. Append the following entry to your boot table. This is typically

performed by editing the file

/etc/bootptab.

where:

Example:

2. If necessary, update your host table and alias name databases as

required by your system.

3. Start the BOOTP daemon, if it is not already running. This is typically

performed using the command

bootpd -a

4. Restart the Document Server to download the IP address, default

router address and subnet mask.

Note:

<host name>:ht=<hardware type>:vm=<vendor magic>:\

:ha=<hardware address>:ip=<Internet address>:\

:sm=<subnet mask>:gw=<gateway field>

ht ether for Ethernet

vm rfc1048

ha The Ethernet or node address, i.e. the Document Server serial

number

ip The IP address of the Document Server

sm The subnet mask

gw The default router address

spserv:ht=ether:vm=rfc1048:\

:ha=00408c24c01c:ip=172.16.253.80:\

:sm=255.255.0.0:gw=172.16.253.254

BOOTP is enabled by default but can be disabled by an Administrator using the System

Settings page.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 174 175

Keine Kommentare

Axis 70 Bedienungsanleitung Seite 33