Axis 70 Bedienungsanleitung PDF herunterladen (Seite 105)

User’s Manual Using the Document Server

105

6. Click Scan and wait for the image to appear in your Web browser.

Depending on the image format specified by the profile, the Web

browser will display the image in an associated viewer or ask you to

save the file. For further processing, you must save the image from

within the viewer as the Web browser will normally use a temporary

file name.

7. If you are not satisfied with the result, you can try one of the other

available profiles or set up a new one by clicking Custom >>.

8. If you have additional documents to scan, click Reserve Scanner to

lock the unit for your own use and then complete the scanning from

the AXIS 7000 control panel.

9. Insert a single page on the flatbed or a stack of paper into the

sheet-feeder of the attached scanner device.

10. At the AXIS 7000 control panel, continue as follows:

One single page or a stack of paper in the sheet feeder:

a. Press Send to scan and transmit the image to your Web

browser in one step.

Several separate pages or stacks of paper:

a. Press Add to scan each page or stack.

b. Insert the next page or stack and press Add again. Repeat the

procedure until all your pages are scanned.

c. Press Send to transmit the image to your Web browser.

During the scanning this message appears on the display:

11. When you have pressed Send and the transfer of the scanned

image is completed, the AXIS 7000 is released for other users to

access.

Notes:

Scanning #1

please wait

• By scanning multiple pages, you can accumulate several pages into one image file.

See “Multipage Image Files” on page 94.

• You must press the Add button or the Send button on the control panel within 5

minutes. Otherwise, the operation will be executed automatically.

•The Reserve Scanner function is not available when Authentication is enabled.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 174 175

Keine Kommentare

Axis 70 Bedienungsanleitung Seite 105