Axis 292 Bedienungsanleitung PDF herunterladen (Seite 12)

AXIS 292 - Installing the AXIS 292

Manual Installation using ARP and Ping in Windows

Assign your product with a unique IP address from a computer on your network, as

follows:

1. Acquire an unused IP address for the AXIS 292 from your network administrator.

The AXIS 292 must be installed on the same subnet as your computer.

2. Connect a standard network cable to the AXIS 292 and connect it to the network.

3. Locate the serial number/MAC Address (S/N) on the label on the underside of the

AXIS 292.

4. From a computer on your network, open a Command Prompt, i.e. from the

Windows Start menu, select Run... and type command or cmd in the field. Click

OK.

5. Enter the commands:

Syntax:

Example

6. Connect power to the AXIS 292.

7. When ‘Reply from 192.168.0.125: ...’ is displayed (approximately 10-15 seconds),

type Ctrl+C to close the ARP Ping session.

8. Start a Web browser and enter the IP address in the Address/Location field.

9. Press Enter.

10.Enter a password for the root user (administrator).

11.The installation is now complete. Proceed to Accessing the network video decoder,

on page 14.

Note:

The default password when the product is shipped is pass. This password may have been changed by the

administrator at a previous installation. Refer to Troubleshooting, on page 25 for instructions on how to

restore the AXIS 292 to the default settings.

arp -s <IP address> <MAC address>

ping -l 408 -t <IP address>

Note: The ping command is

followed by -l (lower case L)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 51 52

Keine Kommentare

Axis 292 Bedienungsanleitung Seite 12