Axis 292 Bedienungsanleitung PDF herunterladen (Seite 20)

AXIS 292 - Network - TCP/IP

Default Router - The default router (Gateway) used for connecting to other networks and

network segments.

DNS configuration

Domain Name - The names of the domains where the AXIS 292 will access its video sources.

Primary DNS Server - This specifies the IP address of the server that normally provides the

translation of domain names to IP addresses on your network. If the server is not able to

resolve a domain name immediately, it will then distribute the domain name query to other

DNS servers on the network.

Secondary DNS Server - This will be used if the primary DNS server is unavailable.

Note: If a DNS server is not available or specified, the address for e.g. a video source must be an IP address.

Host Name Configuration

Host Name - If you are running a DNS server on your network and wish to connect to the

AXIS 292 using a name, enter the product’s host name here. The host name is usually the

same as the assigned DNS Name. A host name is always the first part of a Fully Qualified

Domain Name and is always one word, with no period. For example, myserver is the

host name in the Fully Qualified Domain Name myserver.axis.com.

HTTP

Port number - The AXIS 292 will use the HTTP port entered here. The default setting is 80.

Alternatively, any port in the range 1024-65535 may be used, but check first with your

system administrator before changing the default setting.

Network Traffic

Connection type - This can be used to change the network speed for your server. Normally,

there is no need to use anything other than Auto-negotiate, which will automatically

select the correct media type. However, if you are using a switch or similar device on your

network and need to specify the media type, this can be done by selecting the correct type

from the drop-down list.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 51 52

Keine Kommentare

Axis 292 Bedienungsanleitung Seite 20