Axis 292 Bedienungsanleitung PDF herunterladen (Seite 13)

AXIS 292 - Installing the AXIS 292

Manual Installation using ARP and Ping in UNIX/Linux

Assign your product with a unique IP address from a computer on your network, as

follows:

1. Acquire an unused IP address for the AXIS 292 from your network administrator.

The AXIS 292 must be installed on the same subnet as your computer.

2. Connect a standard network cable to the AXIS 292 and connect it to the network.

3. Locate the serial number/MAC Address (S/N) on the label on the underside of the

AXIS 292.

4. Connect power to the AXIS 292.

5. Close the ARP Ping session once ‘Reply from 192.168.0.125: ...’ (or similar) is

displayed (approximately 10-15 seconds).

6. Start a Web browser and enter the IP address in the Address/Location field.

7. Press Enter.

8. Enter the password for the root user (administrator).

9. The installation is now complete. Proceed to Accessing the network video decoder,

on page 14.

Notes: In some Unix systems, the arp command can be located in a directory that is not on the

command path.

The default password when the product is shipped is pass. This password may have been changed by the

administrator at a previous installation. Refer to Troubleshooting, on page 25 for instructions on how to

restore the AXIS 292 to the default settings.

Syntax:

arp -s <IP Address> <MAC Address> temp

ping -s 408 <IP address>

Example:

arp -s 192.168.0.125 00:40:8c:18:10:00 temp

ping -s 408 192.168.0.125

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 51 52

Keine Kommentare

Axis 292 Bedienungsanleitung Seite 13