Axis 292 Bedienungsanleitung PDF herunterladen (Seite 11)

AXIS 292 - Installing the AXIS 292

Manual Installation using AXIS IP Utility

Follow these instructions to set the IP address manually using AXIS IP Utility:

1. Acquire an unused IP address from

your network administrator for your

AXIS 292. (AXIS IP Utility detects the

subnet your computer is connected

to. The AXIS 292 must be installed on

the same subnet).

2. Connect a standard RJ-45 network

cable to the AXIS 292 and connect it

to the network.

3. Connect power to the AXIS 292.

4. Start AXIS IP Utility on your computer.

5. Enter the serial number:

6. Enter the acquired IP address for your AXIS 292 and click Set IP.

7. When prompted by AXIS IP Utility, restart the network video decoder by

disconnecting and reconnecting the external power supply.

8. A message confirming that the IP address has been set will be displayed, click OK.

9. Click View Home Page to access the AXIS 292 Web pages.

10.Enter the password for the root user (administrator).

11.The installation is now complete. Proceed to Accessing the network video decoder,

on page 14.

Note:

The default password when the product is shipped is pass. This password may have been changed by the

administrator at a previous installation. Refer to Troubleshooting, on page 25 for instructions on how to

restore the AXIS 292 to the default settings.

AXIS IP Utility is a Windows software application that installs the AXIS 292 to your local network

using a static IP address.

• Download the AXIS IP Utility software to your computer, free of charge, from the Support

pages at http://www.axis.com/techsup/software

• Double-click the setup.exe file and follow the on-screen instructions to install the

software on your computer.

The serial number/MAC address (S/N) is located on the label on the underside of the AXIS 292.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 51 52

Keine Kommentare

Axis 292 Bedienungsanleitung Seite 11