Axis AXIS 5900 Bedienungsanleitung PDF herunterladen (Seite 62)

Section 6 Setting Up - NetWare AXIS 5900 User’s Manual

Installing the

AXIS 5900 in IP/IPX

Follow the instructions below:

1. From the AXIS 5900 internal web pages, go to admin | Network

Settings | NetWare.

2. Set the NDS mode parameters on the NetWare page:

• PSERVER NDS Tree (example: NW5TREE)

PSERVER NDS File Server: (example: FILESERVERNAME)

• PSERVER NDS Distinguished Name:

(example: AXISXXXXXX.<context>, where <context> is the

container where you want to create your print server)

3. Click OK when finished.

4. Use the NetWare Administrator to create the printer, print server

and queue objects in the NDS tree and then link them together.

The Print Services Quick Setup (Non-NDPS) utility can be used

for this. Go to Tools in the NetWare Administrator.

5. Use the Add Printer Wizard on your work station to install the

printer on your client.

Additional configuration and management can be performed

from any standard Web browser. Please refer to Using a Web

Browser for Print Server Management, on page 93.

Notes:

Important!

• If both the IPX and IP protocols are enabled in your network and the print

server uses DUAL_STACK (enabled by default) as its network transport

protocol, then IPX will be chosen. To force the print server to use the IP

transport protocol, go to your print server’s web interface and choose Admin |

Detailed View | NetWare and change the NetWare Transport Protocol from

DUAL_STACK to IP_ONLY. Save and exit when finished.

• Pure IP requires that you run NetWare 5 or higher.

In order for the print server to log in using the IP protocol, RCONAG6.NLM has to

be loaded to a specified tree. If you have multiple trees, make sure that one file

server in the specified tree has RCONAG6.NLM loaded.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 153 154

Keine Kommentare

Axis AXIS 5900 Bedienungsanleitung Seite 62