Axis AXIS 5900 Bedienungsanleitung PDF herunterladen (Seite 19)

AXIS 5900 User’s Manual Section 4 Basic Installation (Wired & Wireless)

Installation Overview

Select the appropriate method to establish a connection between

the workstation / laptop and the AXIS 5900. The following

descriptions provide an overview of the installation procedures:

Setting up using the

Ethernet interface

• To establish communication with the network, an IP address

must be assigned to your AXIS 5900, see Assigning an IP address

to the print server, on page 21

• Set the WLAN Network Mode and enter the SSID, WLAN

channel and WEP keys according to your network, see

Config-

uring the AXIS 5900 for wireless printing

, on page 31

• The AXIS 5900 must be restarted for the WLAN settings to take

effect. On power up, the AXIS 5900 will automatically select

WLAN communication if there is no Ethernet cable connected.

Disconnect the network cable and disconnect and reconnect

the AXIS 5900 power supply.

Setting up over the

WLAN

Before you begin, configure the WLAN settings on your

workstation / laptop as described below (refer to the user

documentation of your WLAN network interface for instructions):

• Select ad hoc mode

• Set the SSID to AXIS followed by the last 6 digits of the serial

number which is found on the underside label of the AXIS 5900

e.g. AXIS181636. The SSID is case sensitive and must be entered

exactly as stated above i.e. in upper-case letters.

• Set the WLAN channel to 11 (channel 14 in Japan)

• Disable the WEP parameter

Proceed with the following:

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 153 154

Keine Kommentare

Axis AXIS 5900 Bedienungsanleitung Seite 19