Axis AXIS 5900 Bedienungsanleitung PDF herunterladen (Seite 131)

AXIS 5900 User’s Manual

131

Factory Default

Settings

Follow the instructions below to reset the AXIS 5900 to the

factory default settings:

1. Remove the external power supply to switch off the AXIS 5900.

2. Press and hold down the test button, while you plug the external

power supply back in. Continue to hold down the test button,

until the network indicator begins to flash at one second

intervals. This should take at least 5 seconds.

3. Release the test button and wait until the network indicator

flashes at least five times.

4. Press and hold the test button again until the network indicator

remains constantly lit.

5. Restart the AXIS 5900 by disconnecting and reconnecting the

external power supply.

The AXIS 5900 is now reset to factory default settings.

Note:

All parameters except Node Address (NODE_ADDR), Internet Address (IP_ADDR)

and DHCP enabled or disabled (DHCP_ENABLE.) are reset. If you want to change

the these parameters, use any standard Web browser. Please refer to Section 10

Management and Configuration, on page 92.

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 153 154

Keine Kommentare

Axis AXIS 5900 Bedienungsanleitung Seite 131