Axis AXIS 5900 Bedienungsanleitung PDF herunterladen (Seite 28)

Section 4 Basic Installation (Wired & Wireless) AXIS 5900 User’s Manual

Setting the IP

address Using ARP in

Windows 95/98/NT/

Me/2000/XP

Open a Command Prompt and enter the following syntax:

The host will return

reply from 192.168.3.191, or a similar

message. This indicates that the address has been set and that

communication is established. You are now ready to print using

FTP or Reverse Telnet.

You have now set the IP address of the AXIS 5900. Continue to

Configuring your print server, on page 34.

Using ARP in UNIX

and Mac OS X

Open a Terminal and enter the following syntax:

Syntax Example

arp -s <Internet address> <Ethernet address>

ping <Internet address>

arp -d <Internet address>

arp -s 192.168.3.191 00-40-8c-10-00-86

ping 192.168.3.191

arp -d 192.168.3.191

• When using the Windows 95 implementation of ARP, change the first line to:

arp -s <IP address> <Ethernet address> <w95host IP

address>, where <w95host IP address> is the IP address of your

Windows 95 host.

• When you execute the ping command for the first time, you will experience a

significantly longer response time than is usual

• The ability to set the IP address with ARP and PING will only be enabled the

first 4 minutes after rebooting the print server.

• By using the arp -d command, the static entry in the arp table is removed

from the host’s cache memory.

Syntax Example

arp -s <host name> <Ethernet address> temp

ping <host name>

arp -d <host name>

arp -s psname 00:40:8c:10:00:86 temp

ping psname

arp -d psname

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 153 154

Keine Kommentare

Axis AXIS 5900 Bedienungsanleitung Seite 28