Axis AXIS 5900 Bedienungsanleitung PDF herunterladen (Seite 46)

Section 5 Setting Up - Windows AXIS 5900 User’s Manual

4. Click Add Port... in the Available ports dialog, select AXIS Port

and click New Port...

5. Select Raw (TCP/IP) as your choice of network protocol and click

OK.

6. Enter the host name or IP address of the print server and the

port number (9900 for LPT and 9902 for LPT2) Click OK.

7. Close the Printer Ports window.

8. Click the Configure Port... button. Choose if error condition pop-

up messages are to be displayed and define the frequency at

which the error messages should be displayed after retry. Click

OK. Continue the installation by clicking Next>.

9. Choose the appropriate printer driver for your printer. Click

Next> and proceed directly to step 11. It is only necessary to

perform steps 9-10 if your printer does not appear in the list.

Note:

10. Click the Have Disk... button. Insert the printer driver diskette/CD

that was provided with your printer, select the appropriate

diskette/CD drive and click OK.

11. Select the printer driver you want to install and click Next>.

12. Enter an appropriate name for your printer and click Next>.

13. Choose whether you want to share the printer with other

network users and click Next>.

14. Choose whether you want to produce a test page and then click

Finish.

Even if the desired printer is available in the Manufacturers and Printer Models

list, you are advised to use the printer driver provided with your printer. This

assures you of the latest driver software.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 153 154

Keine Kommentare

Axis AXIS 5900 Bedienungsanleitung Seite 46