Axis BTA 2100D Betreibershandbuch PDF herunterladen (Seite 40)

100

101

When the Assign # IP addresses starting from: #.#.#.# radio button is selected,

the bottom portion of the dialog changes.

You may select to consecutively assign IP addresses beginning from a particular

address. Enter the number of IP addresses you want to assign automatically. Enter

the starting address here. As 3800s are powered on, IP addresses are automatically

assigned starting with this address.

NOTE: Proceed to Using a Password to Protect BOOTP Settings.

Specifying IP Addresses from a Central BOOTP

Server

If IP addresses are managed by a Network Administrator from a central source,

the 3800 and/or 3900 GCs must be added to the list of devices requiring IP

addresses. IP addresses must be assigned to GCs using a BOOTP Server. A

BOOTP Server lists Ethernet addresses (which are unique to each

communication card installed in each 3800 and 3900 GC) along with the IP

addresses that are to be assigned to the corresponding device. You may obtain

the Ethernet address for each GC from the GC’s front panel or the label on the

Ethernet card within the 3800 GC. Turn on the 3800 GC and press any key to

allow it to start in local mode. The Ethernet address will be automatically loaded

into the BOOTP Server list for 3900 GCs.

ENTRY

TABLE EDI T

PAGE CURSOR

NEW

LINE

HELP UNDO

DELETE

LINE

CLEAR

TABLE

ENTERDECRINCR

SAMPLE

DELIVERY INJECTOR

GC CONTROL INSTRUMENT

FLOW/

PRESSURE

COLUMN

OVEN DETECTOR OUTPUT

METHOD SEQUENCE

SELECT/

EDIT

PRIORITY SAMPLE

SUSPEND RESUME

METHOD

AUTOMATION

AC TIVATE

SINGLE METHOD

EDIT MENU

NOT

READY READY RUN

START STOP

STATUS SETUP

When the GC has completed its initialization process, press the menu button.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 596 597

Kommentare zu diesen Handbüchern

Keine Kommentare

Axis BTA 2100D Betreibershandbuch Seite 40

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Axis BTA 2100D