Axis CAMERA RECORDER 1.1 Bedienungsanleitung PDF herunterladen (Seite 25)

AXIS Camera Station Administration

AXIS Camera Station User’s Manual 25

7. Under the Recordings tab, select Record on I/O alarms.

8. Click OK to save and exit.

Get images from FTP

directory

Check to enable pushing of images from an FTP server to AXIS Camera Station.

See FTP, on page 23.

Minimum image size

(bytes)

Setting a minimum image size can help prevent the sending of incomplete

images.

Directory Specify the FTP server directory to fetch recorded images from. This could be

from another server within your Windows network or from a local drive on your

server PC where AXIS Camera Station is installed.

Link to Camera

(button)

Click here to open the camera's home page, from where it is possible to

configure all of the camera settings.

Test Image (button) Click here to check that AXIS Camera Station is getting images from the

camera. If there are no images, check that the IP address and camera/video

server type are correct and that the user ID and password have been entered, if

these are required.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 72 73

Keine Kommentare

Axis CAMERA RECORDER 1.1 Bedienungsanleitung Seite 25