Axis CAMERA RECORDER 1.1 Bedienungsanleitung PDF herunterladen (Seite 15)

AXIS Camera Station User Interface

AXIS Camera Station User’s Manual 15

View Selection From these push buttons or from the View menu you can select your preferred

camera views. The different camera views are configured under Administration

| Views, see Views, on page 33 for instructions.

No Live Images Click the No Live Images button to close the camera windows. Showing live

images in the main window uses a lot of processor power. Not displaying live

images reduces the amount of processor power required by the service, whilst

not affecting recordings in any way. The amount of bandwidth required is also

less when not showing live images. In the Views section of the Administration

pages it is possible to set up the system so that it always starts in this mode,

see Default View, on page 33.

Select Camera Select a camera to be shown in a new window. Choose this if you want to close

the view windows (and thus save on processor power) but still want a single

camera view visible on your desktop:

Monitoring I/O When clicking this button, the I/O Status of all units are displayed. Monitoring

I/O defines when events, such as an alarm or motion detection, should be

triggered. Each I/O is shown on one line, along with a colored indicator:

• green indicator means the I/O is in its normal state

• red indicates that the I/O is active, recording in progress

• yellow means there is no communication with the I/O

Buttons for starting and stopping an I/O output are also shown. See External

I/Os, on page 36 for configuration.

Click for

detailed

camera view

red= connection normal, I/O is active, recording in progress

green= connection normal, I/O is in normal state: no recording in progress

yellow = no communication with I/O

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 72 73

Keine Kommentare

Axis CAMERA RECORDER 1.1 Bedienungsanleitung Seite 15