Axis 231D+ Installationsanleitung PDF herunterladen (Seite 6)

Page 6 AXIS 231D+/232D+ Installation Guide

Connection Module Pinout

• Digital Input (1-4) - connect to GND to activate or leave floating (unconnected) to deactivate

• Transistor Output (1-4) - Max. load 100mA, max. voltage 24V DC. An open-collector NPN transistor

with the emitter connected to pin 2 (GND). If used with an external relay, a diode must be connected

in parallel with the load for protection against any voltage transients.

LED indicators

Important!

The AXIS 231D+/232D+ is designed for indoor and outdoor use. To use the

camera outdoors, it must be installed in an approved outdoor housing. Please see

www.axis.com for more information on outdoor housings.

Do not use the camera’s dome bubble if it is to be installed in a protective

housing as the use of two dome bubbles will reduce the image quality and cause

image blurring.

Function Description Function Description

n/a not used GND ground

n/a not used Transistor Output 4 See below

n/a not used Digital Input 4 See below

n/a not used Transistor Output 3 See below

n/a not used Digital Input 3 See below

n/a not used Transistor Output 2 See below

PS GND ground Transistor Output 1 See below

24 VAC 24 VAC Digital Input 2 See below

24 VAC 24 VAC Digital Input 1 See below

LED Color Description

Network Green Steady for connection to 100 Mbit/s network. Flashes for network activity.

Amber Steady for connection to 10 Mbit/s network. Flashes for network activity.

Unlit No connection.

Power Green Normal operation.

Amber Flashes green/amber during firmware upgrade.

1 2 3 4 5 6 7 8 9 10 11 ... 53 54

Keine Kommentare

Axis 231D+ Installationsanleitung Seite 6