Axis Q1755 Bedienungsanleitung PDF herunterladen (Seite 8)

AXIS Q1755 - Accessing the Camera

Setting the root password

To gain access to the product, the password for the default administrator user root must be set. This is done in the ‘Configure

Root Password’ dialog, which is displayed when the network camera is accessed for the first time.

To prevent network eavesdropping when setting the root password

, this can be done via an encrypted HTTPS connection,

which requires an HTTPS certificate (see note below).

To set the password via a standard HTTP connection, enter it direct

ly in the first dialog shown below.

To set the password via an encrypted HTTPS

connection, follow these steps:

1. Click the Create self-signed certificate button.

2. Provide the requested information and click OK. The certificate is created and the password can now be set

securely. All traffic to and from the network camera is encrypted from this point on.

3. Enter a password and then re-enter it to confirm the spelling. Click OK. The password has now been configured.

Note:

HTTPS (Hypertext Transfer Pr

otocol over SSL) is a protocol used to encrypt the traffic between web browsers and servers.

The HTTPS certificate controls the encrypted exchange of information.

The default administrator user root cannot be deleted.

If the password for root is lost or forgotten, the network camera must be reset to the factory default settings. See page

37.

Access from the internet

Once connected, the camera is accessible on your local network (LAN). To access the camera from the Internet you must

configure your broadband router to allow incoming data traffic to the camera. To do this, enable the NAT-traversal feature,

which will attempt to automatically configure the router to allow access to the camera. This is enabled from Setup > System

Options > Network > TCP/IP Advanced.

For more information, please see NAT traversal (port mapping) for IPv4, on page 33. See also the AXIS Internet Dynamic

DNS Service at www.axiscam.net For Technical notes on this and other topics, visit the Axis Support web at

www.axis.com/techsup

To configure the password

directly via an unencrypted

connection, enter the password here.

To create an HTTPS connection,

start by clicking this button.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 52 53

Keine Kommentare

Axis Q1755 Bedienungsanleitung Seite 8