Axis Q1755 Bedienungsanleitung PDF herunterladen (Seite 13)

AXIS Q1755 - Video & Audio settings

Video & Audio settings

This section describes how to configure the camera, and is intended for product Administrators, who have unrestricted access

to all the Setup tools; and Operators, who have access to the settings for Basic Setup, Video & Audio and Events. Refer to the

online help files for detailed information.

You can access the configuration pages by clicking Set

up in the top right-hand corner.

Video Stream

The video stream settings are in 4 tabs:

•Image

•Audio

• H.264

•MJPEG

Image

Image Capture

Capture mode - Select HDTV resolution, either 720p

(progressive scan) or 1080i (interlaced with the

option of de-interlacing).

• 720p provides a better quality video stream especially when capturing motion and is recommended for all resolutions

except 1920x1080

• 1080i provides a larger image, but may contain motion artifac

ts and should only be used with 1920x1080 resolution

Note:

If component video out (analog video

out) is used, make sure that the connected HDTV screen supports 1080i resolution

if 1080i is the intended HDTV resolution.

Image Appearance

Use these settings to modify the image resolution and compression. Setting the compression level affects the image quality

and the amount of bandwidth required, the lower the compression, the higher the image quality with higher bandwidth

requirements. The image can also be mirrored (reversed).

Video Stream

To avoid bandwidth problems on the network, the frame rate allowed to each viewer can be limited. Select the Unlimited

radio button to allow the highest available frame rate or select the Limited to... radio button and enter a value (1-30) fps in

the field.

Setup

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 52 53

Keine Kommentare

Axis Q1755 Bedienungsanleitung Seite 13