Axis P5534 Installationsanleitung PDF herunterladen (Seite 9)

AXIS P5532/P5534 Installation Guide Page 9

ENGLISH

7. Route and connect the network cable and the multi-connector cable, if applicable, to the

network camera. Be careful not to damage the cables when connecting them. Make sure the

foam gasket holes are aligned with the cable tracks and, if applicable, remove the cut-out piece

for the multi-connector cable from the foam gasket.

8. Put the camera base lid back in its original position and fasten the screws.

9. Secure the camera using the supplied safety wire.

10. Slide the unit holders on the network camera into the slots on the mounting plate and rotate

the camera unit.

11. Install the High PoE Midspan 1-Port, see Install the AXIS T8123 High PoE Midspan 1-port, on

page 11.

12. Check that the indicator LEDs on the midspan indicate the correct conditions. See the table on

page 21 for further details.

13. Install the ceiling tile, with the camera mounted, into the ceiling.

Multi-connector cable

Network cable

Safety wire

Ceiling tile

Ceiling bracket

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 111 112

Keine Kommentare

Axis P5534 Installationsanleitung Seite 9