Axis RightFax 8.5 Installationsanleitung PDF herunterladen (Seite 11)

RightFax 8.5 Installation Guide 11

DID allows RightFax to route incoming faxes to their intended destinations

within your company. Whenever someone dials a number within the range, the

DID trunk is activated by the phone company and the fax board accepts the

incoming fax. Along with the fax data, the phone company sends the board the

last three or four digits of the phone number dialed. The fax board collects these

digits and passes them to RightFax. Each RightFax user has a personal fax

mailbox which is assigned one of the DID trunk’s numbers (known as the

“routing code”). Received faxes are routed to the mailbox whose routing code

matches the dialed DID number.

Warning Never plug a loop-start phone line into a DID fax board when there is any

voltage present on the phone line. Doing so will damage the fax board and void all

warranties.

Dialed Number Identification Service (DNIS) phone lines

DNIS is a T1-based version of DID service. For information on configuring your

fax boards for DNIS, refer to the hardware guide included with your fax board.

Integrated Services Digital Network (ISDN) phone lines

ISDN is a worldwide standard communications network for digital data, voice,

and video communication. The main advantages of ISDN over analog telephone

lines are fast call setup and release and additional cost-recovery information

included with the call.

PRI, BRI, E1, and T1 digital phone lines

RightFax supports PRI, BRI, E1, and T1 digital phone lines assuming you have

purchased and installed the appropriate type of fax boards and network interface

card. For more information on digital phone lines, refer to the RightFax Fax Board

Guide.

  

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 45 46

Keine Kommentare

Axis RightFax 8.5 Installationsanleitung Seite 11