Axis Q6032-E Installationsanleitung PDF herunterladen (Seite 10)

PRODUCT REVIEW GUIDE  AXIS Q6032-E Network Camera

Axis Communications Last updated: September, 2009

6.5 Reset to factory default

If you for any reason contact with the camera is lost, you can reset it to factory default settings:

1. Remove the dome cover from the camera unit; this will automatically disconnect power

from the camera.

2. Press and hold the Control button and the Power button.

3. Keep the both buttons pressed until the Status indicator LED flashes amber (this may

take up to 15 seconds).

4. Release the Control button. When the Status indicator LED displays green (which can

take up to 1 minute) the process is complete and the camera has been reset. The Status

indicator LED will display green for 10 seconds only. After that it will be unlit.

5. Release the Power button and replace the dome cover, this will automatically reconnect

power to the camera.

6. Re-assign the IP address.

Status indicator LED

Control button

Power button

(for Factory Default only)

Caution!

Heater

may be hot

1 2 ... 5 6 7 8 9 10 11

Keine Kommentare

Axis Q6032-E Installationsanleitung Seite 10