Axis M1144-L Network Camera Bedienungsanleitung PDF herunterladen (Seite 5)

AXIS M1144–L

Hardware Overview

• ConnectingtoanAXISVideoHostingSystemservice.See

page 37

. To connect, press and hold the button for about

1 second until the Status LED ﬂashes green.

• ConnectingtoAXISInternetDynamicDNSService. See

page 38

. To connect, press and hold the button for

about 3 seconds.

• Resetting the p rod uct to fa ctory default settings. See

page 44

I/O terminal connector - Use in applica tions for e.g. motion detection, eve nt triggering, time lapse recording and alarm notiﬁcations.

In addition to an auxili ary pow e r and a GND pin, the I/O terminal connector provides the interface to:

• Digital output – For connecting external devices such as relays and LEDs. Connecte d devices ca n be activa ted by

the VAPIX® Application Programming Interface, output b uttons on the Live View page or by an Actio n Rule. The

output will show as active (shown under System Options > Ports & Devices) if the alarm device is activated.

• Digital input – An alarm input for conne cting devices that can to ggle between an open and closed circuit, for

example: PIRs, door/window contacts, glass break detectors, etc. When a signal is received the state cha nges and

the input becomes active (shown under System Options > Ports & Devices).

LED Indicators

LED

Color

Indication

Green

Steady for connection to a 100 MBit/s network. Flashes for network activity.

Amber

Steady for connection to a 10 MBit/s network. Flashes for network activity.

Network

Unlit No network connection.

Green Steady g reen for normal operation.

Amber

Steady during startup and when restoring settings.

Status

Red

Slow ﬂash for failed upgrade.

Green

Normal oper ation.

Power

Amber

Flashes green/amber during ﬁrmware upgrade.

Note

• The Status LED can be conﬁgured to be unlit during normal operation. To conﬁgure, go to Setup > System Options >

Ports & Devices > LED.Seet

he online help for more information.

• The Status LED can be conﬁgured to ﬂash while an ev ent is a ctive.

• The Status LED can be conﬁgured to ﬂash for id entifying the unit. Go to Setup > System Options > Maintenance .

1 2 3 4 5 6 7 8 9 10 ... 52 53

USER MANUAL 1
AXIS M1144–L 10

Kommentare zu diesen Handbüchern

Keine Kommentare

Axis M1144-L Network Camera Bedienungsanleitung Seite 5

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitskameras Axis M1144-L Network Camera