Axis 247S Bedienungsanleitung PDF herunterladen (Seite 28)

AXIS 247S - System Options

SNMP

The Simple Network Management Protocol (SNMP) allows the remote management of network devices. Select

the version of SNMP to use, depending on the level of security required. Select the version of SNMP to use, by

checking the appropriate box. The three levels of security are:

• SNMP V1 - includes no security

• SNMP V2c - uses very simple security, e.g. community name as password

• SNMP V3 - provides encryption and secure passwords. Use with HTTPS.

If using V1 and V2c, enter the community name for read-only access to all supported SNMP objects (except

the root password and other objects that require write access). Default value = public. You can also specify the

community name for read/write access to all supported SNMP objects (except read-only objects).

Default value = pass.

If using HTTPS enter the password if it has not already been set. To set the password again, the Video Server

must be reset to the factory default settings.

UPnP™

The Video Server includes support for UPnP™ in Windows ME and Windows XP. UPnP™ is enabled by default.

Note: UPnP™ must be installed on your workstation if running Windows XP. To do this, open the Control Panel from the Start Menu and

select Add/Remove Programs. Select Add/Remove Windows Components and open the Networking Services section. Click Details

and then select UPnP™ as the service to add.

RTP (Multicast)/MPEG-4

These settings are the IP address, port number, and Time-To-Live value to use for the media stream(s) in

multicast MPEG-4 format. Only certain IP addresses and port numbers should be used for multicast streams.

For more information, please see the online help.

Bonjour

When Bonjour is enabled, the video server is automatically detected by operating systems and clients that

support this protocol.

Ports & Devices

I/O Ports - the pinout, interface support and the control and monitoring functions provided by this connector

are described in

Unit Connectors, on page 31.

Maintenance

• Restart - The unit is restarted without changing any of the settings. Use this method if the unit is not

behaving as expected.

•Restore - The unit is restarted and most current settings are reset to factory default values. The set-

tings that will not be reset are as follows:

• the boot protocol (DHCP or static)

• the static IP address

• the default router

•the subnet mask

• the system time

• Default - The default button should be used with caution. Pressing this will return all of the Video

Server's settings to the factory default values (including the IP address)

Upgrade Server - See Upgrading the Firmware, on page 33.

Backup - To take a backup of all of the parameters, and any user-defined scripts, click this button. If necessary,

it is then possible to return to a previous configuration if settings are changed and there is unexpected

behavior.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare

Axis 247S Bedienungsanleitung Seite 28

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Axis 247S