Axis USB Wireless G Bedienungsanleitung PDF herunterladen (Seite 28)

Print Server Management

28 AXIS OfficeBasic USB Wireless G

Print server management using the Reset button

The reset button can be used for several operations, see Print Server Setup, on

page 8 for the physical location of the Reset button.

Reset the Print Server:

1. Verify that the DIP switch is on “Nor.”

2. Press the reset button once.

Print a Test Page

1. Hold down the reset button for 5 seconds.

2. The test page will be printed on the connected printer.

WARNING! This will restart the print server and stop all on-going and pending print

jobs!

The DIP switch can be set on either “Nor.” or ”Diag.”

The test page displays information on these parameters:

• Device Name (print server name)

• Firmware version

• MAC address

• IP address

•Subnet Mask

•Default Router

• SSID

• Channel

• WPA-PSK enabled or disabled

• AppleTalk enabled or disabled

• AppleTalk Port Name

• Rendezvous enabled or disabled

• Rendezvous service name

•Site survey

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 42 43

Keine Kommentare

Axis USB Wireless G Bedienungsanleitung Seite 28