Axis Print Server 5470e Bedienungsanleitung PDF herunterladen (Seite 185)

AXIS 5470e User’s Manual Section 15: SNA Parameter Overview

185

Mainframe Specific

Parameters

AS/400 Specific

Parameters

Parameter Name Default

NODE_ID Node ID

E07xxxxx, where "xxxxx" are the last five digits of the

Print Server’s MAC address.

This is the SNA PU identification.

The first 3 digits is the IDBLK and the last five is the IDNUM.

When defining a VTAM Switched Major Node, this parameter should match the IDBLK and IDNUM values

specified in the PU definition.

Only Hexadecimal characters (0-9 and A-F) allowed.

Parameter Name Default Emulation

NWORK_NAME Network Name APPN 5494 only

Description - This is the Print Server Network Name.

The value of this parameter is normally the same as the "Host Network Name", indicating that both the

Print Server and the AS/400 system are located on the same APPN network.

The Network Name may comprise the letters A-Z and/or numerals 0-9, but must begin with a letter.

The letters used should all be in UPPERCASE and a maximum of 8 characters are allowed.

LU_NAME LU Name Axxxxxxx 5494 only

Description - Axxxxxxx, where "xxxxxxx" is the last 7 characters of the AXIS 5470e serial number, in

reverse order, e.g.

if s.no. =

00 40 8C 1B 06 D4 the default LU Name =

A4D60B1C.

This will be the name of the APPC device and controller

created during auto-configuration

Description - Axxxxxxx, where "xxxxxxx" is the last seven characters of the Print Server serial number, in

reverse order, i.e. a print server with serial number 00 40 8C 1B 06 D4 will have the default CP Name

A4D60B1C. This will be the name of the APPC controller created during auto-configuration.

H1_NW_NAME Host Network Name APPN 5494 only.

H1_LU_NAME Host LU Name

DEFAULT

5494 only

1 2 ... 180 181 182 183 184 185 186 187 188 189 190 ... 266 267

Keine Kommentare

Axis Print Server 5470e Bedienungsanleitung Seite 185