Axis AXIS USB Bedienungsanleitung PDF herunterladen (Seite 36)

Adding Printers in Macintosh

36 AXIS OfficeBasic USB & AXIS OfficeBasic Parallel User’s Manual

Installation in Mac OS X using AppleTalk

This section describes setting up your print server for printing in the Mac

OS X.

1. Start Print Center (from Go | Applications | Utilities => Print Center) or

the Printer Setup Utility.

2. Select Printers | Add Printer...

3. From the Printer List dialog, select AppleTalk.

4. Now, the port of your print server will appear in the list of available printers.

The port is shown as <host name>_<port>.

AXIS OfficeBasic USB The <port> is USB1. Example: AXIS610282_USB1

AXIS OfficeBasic

Parallel

The <port> is LPT1. Example: AXIS610282_LPT1

Select the print server port you want to use.

5. Select an appropriate printer driver for your printer from the Printer Model

drop-down list. If the printer is not available in the list, select Generic. (Note:

Generic is only used for postscript printers.)

You can also browse for a printer driver on your computer or network by

selecting Other... from the list.

6. Click Add to complete the installation.

Installation of LPR printing in MAC OS X

If you want to print using LPR, select:

1. Printers | Add Printer...

2. From the Printer List dialog, select LPR printers using IP.

3. Enter the IP address or host name of the print server in the LPR printer’s

Address field. You must uncheck

the Use Default Queue on Server check

box and enter a Queue Name:

AXIS OfficeBasic USB Enter USB1

AXIS OfficeBasic

Parallel

Enter LPT1

4. Choose a printer driver from the Printer Model list and click Add to finish.

Installation on an Mac OS 9.1 or older, using AppleTalk

Basic Configuration On Mac OS 9.1 or older, basic configuration in AppleTalk is performed

simply by opening the Chooser window and selecting a printer.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 70 71

Keine Kommentare

Axis AXIS USB Bedienungsanleitung Seite 36