Axis 5800 Bedienungsanleitung PDF herunterladen (Seite 20)

Resetting the Print Server AXIS 5800+ Mobile

Resetting the Print Server

Follow the instructions below to reset the AXIS 5800+ parameters to the default values

(Factory Default):

Important:

1. Remove the external power supply to switch off the AXIS 5800+.

2. Press and hold down the test button, while you plug the external power supply back in.

Continue to hold down the test button, until the network indicator begins to flash at one

second intervals. This should take at least 5 seconds.

3. Release the test button and wait until the network indicator flashes at least five times.

4. Press and hold the test button again until the network indicator remains constantly lit.

5. Restart the AXIS 5800+ by disconnecting and reconnecting the external power supply.

The print server is now reset to the factory default settings.

A Factory Default will reset the internal settings of the print server to default and should be performed

with caution. All parameters except Node Address (NODE_ADDR), Internet Address (IP_ADDR) and

DHCP enabled or disabled (DHCP_ENABLE.) are reset.

1 2 ... 15 16 17 18 19 20 21 22

Keine Kommentare

Axis 5800 Bedienungsanleitung Seite 20