Axis 1620 Bedienungsanleitung PDF herunterladen (Seite 54)

2-3

IM 701610-01E

Name and Use of Each Part

2.2 Operation Keys/Jog Shuttle/Knobs

VERTICAL Group

PRESET

VDIV

VERTICAL

CH1 to CH4 Keys (Sections 5.1 to 5.5, 5.7 to 5.10)

On the DL1620, the CH3 and CH4 keys are disabled.

Displays a menu used to turn ON/OFF the display on each channel, set the vertical

position, coupling, probe attenuation, offset voltage, bandwidth limit, inversion,

expansion/reduction of the vertical axis, linear scaling, and waveform labels. In addition,

by pressing this key before operating the V/DIV knob, the channel that is to be controlled

by the V/DIV knob can be selected.

PRESET Key (Section 5.6)

Displays the preset menu that sets the V/div, input coupling, probe attenuation and

trigger level to the optimum 5 V CMOS, 3.3 V CMOS, or the current probe (700937,

701930) (or preset level) automatically. This preset menu allows you to set all channels

or the selected channels at once.

V/DIV Knob (Section 5.8)

Turning this knob during acquisition (i.e. while the START indicator is lit) sets the voltage

axis sensitivity. Before turning this knob, be sure to select the channel you want to

adjust by pressing the corresponding channel key (CH1 to CH4 (or CH1 and CH2 for the

DL1620)).

HORIZONTAL Group

TIME DIV

ZOOM

HORIZONTAL

TIME/DIV Knob (Section 5.12)

Use this knob to set the time scale. If you change the scale while acquisition is

suspended, the new value becomes effective when acquisition resumes.

(SHIFT +) ZOOM Key (Sections 8.9, 8.10)

Displays a menu related to the waveform zoom display.

Pressing the ZOOM key after pressing the SHIFT key displays a menu related to data

searching (Search and Zoom Function).

TRIGGER Group

SIMPLE

ACTION DELAY

MODE POSITION

ENHANCED

TRIGGER

TRIG D

(SHIFT +) MODE Key (Sections 6.1, 6.15, 7.3)

Displays a menu used to select the trigger mode.

Pressing the MODE key after pressing the SHIFT key displays a menu related to action-

on-trigger.

SIMPLE Key (Sections 6.4 to 6.7)

Displays the menu for the simple trigger mode, which provides normal triggers such as

the edge trigger. Simple trigger mode is selected when the indicator located above this

key is lit.

ENHANCED Key (Sections 6.4, 6.8 to 6.14)

Displays the menu for enhanced trigger mode, which provides complex triggers such as

the pattern trigger. Enhanced trigger mode is selected when the indicator located above

this key is lit.

(SHIFT +) POSITION Key (Sections 6.2, 6.3)

Used to set the trigger position.

You can set the trigger delay by pressing the POSITION key after pressing the SHIFT

key.

TRG’D Indicator

Lights up when a trigger is activated.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 440 441

Kommentare zu diesen Handbüchern

Keine Kommentare

Axis 1620 Bedienungsanleitung Seite 54

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucken & Scannen Axis 1620