Axis M7001 Bedienungsanleitung PDF herunterladen (Seite 6)

6 of 9

5. For example: To limit the area where the server is looking for motion, decrease the size of the

Default Window and drag it to center on the area of the image where relevant motion is expected.

This will limit the number of false triggers due to background motion, thus conserving disk space.

If you wish to capture all motion that the camera sees, this window can be left full screen.

Additional windows can also be added, and the windows can be set to “Include” or “Exclude”

depending on your preference. An “Exclude” window might be useful if there is a tree or flag in

the image that is frequently moved by the wind, and it is not desired to trigger and event if the

tree or flag moves.

6. For configuring the Motion Detection sensitivity there are three values that can be individually set

for all included windows, “Object Size”, “History”, and “Sensitivity”:

 Object Size refers to the number of pixels that need to

change to trigger a motion event. The larger the object

size, the less sensitive the detection. It is recommended

that this be set to the minimum value possible.

 History refers to the length of time a moving object

remains in the window before it is considered to be a non-

moving part of the scene. A high setting will continue to

trigger motion as long as the object is moving. A low

setting will trigger motions when the object initially moves

but then will be ignored. It is recommended that this slider

be set high somewhere above 80%.

 Sensitivity refers to the difference in luminance from one

frame to the next. A low setting will only trigger motion of

there is a great difference in luminance, i.e. a bright object

suddenly appears on a dark background. It is

recommended to set this slider as high as possible.

Typically greater than 90%. This setting will most likely

need adjustment during initial setup to obtain the most

reliable motion detection.

7. Select “System Options” on the left, then choose “Advanced”, then “Plain Config”:

1 2 3 4 5 6 7 8 9

Keine Kommentare

Axis M7001 Bedienungsanleitung Seite 6