Axis P5522 Bedienungsanleitung PDF herunterladen (Seite 21)

AXIS P5522–E PTZ Dome Network Camera

PTZ (Pan Tilt Zoom)

OSDI Zones

On-Screen Direction Indicator (OSDI) zones can be included in the overlay text (see Overlay, on page 17)toaidtheusertonavigate

the Axis product. Each OSDI zone is set up with coordinates and a descriptive name.

OSDI zones are set up under PTZ > OSDI Zones. The Axis product uses the coordinates of the center of the view to set the lower

left and uppe r right zone are as. First navigate to where you wou ld like the lowermost left point of the OSDI zone to be located.

Click Get to set the coordinates. Proceed to where the upper right point of zone should be located and click Get. Give the zone a

descriptive name and click OK.

To include the name of the OSDI zone in the overlay text, go to Video < Video Stream < Overlay Settings.ChecktheInclude

text box and e nter the modiﬁer #L in the ﬁeld. For more information about m odi ﬁers, see File Naming & Date/Time Formats in

theonlinehelp

Advanced

Limits

Deﬁne the pan, tilt, zo om and focus limits for the Axis product. Movements to the left and right, up and down, can be restricted to

narrow the area under surveillance. The near focus limit can be set to avoid focusing on objects too close to the cam e ra lens.

Move speed sets the speed of the camera’s pan and tilt movements. The default setting is maxim um speed.

When using a joystick (or emulating one with the mouse) the Enable proportional speed setting can be used to reduce the maximum

pan/tilt movement speed, i.e. the speed the camera view moves at when the joystick is pushed all the way out in any direction. This is

useful then the view is zoomed in on an object.

When Enable Auto-ﬂip is selected, the Axis product will simulate continuous pan movement in the same direction, i.e. the camera

will pan the full 360 degrees, even though there is a mechanical stop at ±180 degrees.

When Enable movement prediction is selected, the Axis product will atte mpt to predict the new position in the pan movement, after

compensating for the slight delay while the camera changes direction a fte

ranauto-ﬂip. This is useful for tracking moving objects or

persons when using the joystick or emulated joystick mode.

See the online help

for more information.

Controls

Panel Shortcut Command Buttons can be conﬁgured to provide direct access to commands issued via the VAPIX® Application

Programming Interface. The buttons will be displayed in the PTZ control panel, which is available in the Live View page though

the Ctrl panel button, see page 8 .

Deselect the options under Enable/Disable controls to disable the pan, tilt, zoom, focus and iris controls.

Note

Disabling PTZ cont

rols will affect preset positions. For example, if the tilt control is disabled, the product cannot move to

preset positions that require a tilt movement.

Control Queue

The administrator can set up a queue for PTZ controllers from PTZ > Control Queue. Once set up, the PTZ Control Queue buttons

appear in the Live View page offering one viewer exclusive control for a limited period of time. Other users will be placed in queue.

A user who belongs to a group (see Users, on page 31) with a higher PTZ priority can go before other use rs in the queue and

take control of the product. The order of priority is as follows:

1. Administrator — An administrator takes over PTZ control regardless of who is ﬁrst in queue. The administrator will be

removed from the queue 60 seconds after the last PTZ control command.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare

Axis P5522 Bedienungsanleitung Seite 21

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitskameras Axis P5522