Axis P5522-E Bedienungsanleitung PDF herunterladen (Seite 16)

AXIS P5522 PTZ Dome Network Camera

Video and Audio

An image or text can be superimposed over the image as overlay. See Overlay, on page 18.

Save your settings before they can take effect.

H.264

H.264, also known as MPEG-4 Part 10/AVC, is a video compression standard that provides high quality video streams at low bit rates.

An H.264 video stream consists of different types of frames such as I-frames, P-frames and B-frames. An I-frame is a complete image

whereas P-frames and B-frames only contain the differences from previous/future frames.

The GOV length is the number of frames between two consecutive I-frames. Increasing the GOV length saves considerably on

bandwidth but may have an adver se affect on image quality.

ThebitratecanbesetasVariable Bit Rate (VBR) or Constant Bit Rate (CBR). VBR adjusts the bit rate according to the image

complexity, using up more bandwidth for increased activity in the image , and less for lower image activity. CBR allows you to set a

ﬁxed Target bit rate that consumes a predictable amount of bandwidth. As the bit rate would usually need to increase for increased

image activity, but in this case cannot, frame rate and image quality are affected negatively. To partly compensate for this, it is

possible to prioritize either frame rate or image quality. Not setting a priority means that frame rate and image quality are equally

affected. You must save your settings before they can take effect.

The current bit rate can be set to appear as text overlay. To do this, select the Include text check box option under Overlay Settings

and enter the code #b in the ﬁeld.

MJPEG

Sometimes the image size is large due to low light or complex scenery. Adjusting the maximum frame size helps to control the

bandwidth and storage used by the Motion JPEG video stream i n these situations. Setting the frame size to the Default setting

provides consistently good image quality at the expense of increased bandwidth and storage usage in lo w light. Limiting the frame

size optimizes bandwidth and storage usage, but may give poor image quality. To prevent increased bandwidth and storage usage,

the maximum frame size should be set to an optimal value.

Stream Proﬁles

There are four pre-programmed stream proﬁles availab le for quick set up. The settings for these can be adjus ted. New customized

proﬁles can also be created. Each proﬁle has a descriptive name, indicating its purpose.

•Thestreamproﬁles can be accessed from the Stream proﬁle drop-down list in the Live View page.

• To add, copy, modify, and remove stream proﬁles g o to Video & Audio > Stream Proﬁles.

• To select the default s tream p roﬁle go to Live View Conﬁg > Stream Proﬁle and choose the proﬁle from the drop-down list.

For more information see the online help

on this page.

Camera Settings

The Video & Audio > Camera Settings page provides access to advanced image settings for the Axis product.

Image Appearance

The image Brightness can be adjusted in the range 0–100, where a higher value produces a brighter image.

Increasing the Sharpness can increase bandwidth usage. A sharper imag e might increase image noise especially in low light

conditions. A lower setting reduces image noise, but the whole image will appear less sharp.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 55 56

Keine Kommentare

Axis P5522-E Bedienungsanleitung Seite 16