Axis M3114-R Bedienungsanleitung PDF herunterladen (Seite 8)

AXIS M3114-R - A&E Spec, Ver 3.1 ae_m3114-r_us_v3-1_1108 Page 8 of 9

and provide information about power, communication with

receiver, the network status and the camera status.

2. Be monitored by a Watchdog functionality, which shall

automatically re-initiate processes or restart the unit if a

malfunction is detected.

2.06 Interfaces

A Network interface

1. The camera shall be equipped with one 100BASE-TX Fast

Ethernet-port and shall support auto negotiation of network

speed (100 MBit/s and 10 MBit/s) and transfer mode (full and

half duplex).

2. The connector shall be a rugged version and of RJ-45 or M12

type.

2.07 Enclosure

A The camera enclosure shall include the following:

1. Tamper resistant rugged aluminum body providing encapsulated

electronics.

2. Integrated dehumidifying membrane

3. Clear transparent lens cover

B The camera enclosure shall provide the ability to adjust the camera

modules angle with at least 45 tilt, 30 pan and 180 rotation

while maintaining an image that is not interfered with by the camera

housing.

2.08 Power requirements

A Power over Ethernet according to IEEE 802.3af - Class 1.

2.09 Environmental

A The camera shall:

1. Operate in a temperature range of -25C to +50C (-13F to

+122F).

2. Operate in a humidity range of 20–80% RH (non-condensing).

1 2 3 4 5 6 7 8 9

Keine Kommentare

Axis M3114-R Bedienungsanleitung Seite 8